204 x 60mm Steel Intumescent Duct Sleeve (2 Hour Max Rating) 180mm Long

Product Code
040471

204 x 60mm Steel Intumescent Duct Sleeve (2 Hour Max Rating) 180mm Long

Tested to BSEN 1366-3: 2009 and classified according to EN 13501-2: 2007 + A1: 2009Tested with Uncapped / Uncapped (U/U) duct configurations as required for ventilation ductsSuitable for masonry walls or plasterboard partitionsRobust galvanised steel shellRecommended wall aperture size 230 x 85mmInstalled centrally positioned within the wall and must be either flush or protruding from both sides of the wall in accordance with the relevant installation detailOnce installed into the wall in the correct position, the perimeter should be sealed with FR Intumescent Acoustic Acrylic Sealant
Technical Data
NotesFor further information please contact Brymec Technical Dept.

For further information please contact Brymec Technical Department

Email: tech@brymec.com

Search engine powered by ElasticSuite